There is no heck a lot of things to launch the drone into the air, there are 2 simple rules:
1. Throw into the wind | Against the wind direction
2. Throw the plane with a little bit force, horizontally to the ground.
]]>
Dronee Corridor mapping feature enables to user easily create surveying mission to survey the roads, electric lines, sea walls, borderlines etc.
To create the corridor mapping mission, just hold your finger on the line where you want to survey, and add "CORRIDOR", repeat adding " CORRIDOR" points along the line. Dronee Software automatically will generate a survey path over the points. and you can increase or decrease the number of flight lines by holding both fingers on the survey path and extend or shrink.
]]>
Curve skipping function turns off the capturing photos on turns. This function saves the camera's SD card memory from unwanted images and speeds up the post-processing time on orthomosaic software like Pix3D, DroneDelpoy, Agisoft, or on other image processing software.
to activate Curve Skipping, follow these steps:
1. SETTINGS->SURVEY
2. activate CURVE SKIPPING
]]>
Route optimization re-route survey path with 1, 3, 5, 7 ......n 2, 4, 6...(n-1) order to increase turn radius, that helps plane to make smooth turns with less turn angle.
to activate "route optimization", follow these steps:
1. SETTINGS -> SURVEY
2. activate ROUTE OPTIMIZATION
]]>
To use dronee supported cameras to use on surveying, first, this camera's WIFI need to be set up in Dronee app. This is a one-time procedure, the second time will be saved in the Dronee app.
To configure Sony RX0 RGB camera's wifi parameters in Dronee app, follow these steps:
1. on Camera,press menu -> Network1 -> Ctrl w/Smartphone -> Connection info
2. on Camera, press up arrow button, you will see camera's SSID and password
3. On Dronee app, SETTINGS -> SURVEY -> CAMERA
4. select DSC RX0 camera from the list.
5. Press WIFI button
6. Enter SSID to the first row
7. Enter Password to the second row.
8. Press SAVE
]]>